Core Component
The stile and rail framework inside the door leaf — light to medium for laminate doors, high density for fire doors.
- Density group
- Light, medium & heavy
- Form
- FJ, FJ lamination, solid
- Grade
- Core
Forging Dynamic Partnerships · Kuala Lumpur, Malaysia
We don’t just supply. We keep your production running.
Your outsourced timber procurement arm in Malaysia. Door components, furniture components and mouldings — sourced, inspected and delivered to specification.
- Experience
- Over 20 YearsIn tropical timber
- Core Product
- FJ / FJLB& solid wood components
- Processing
- Kiln-Dried& chemically treated to your application
- Network
- KL + NationwideHead office in KL, production facilities & warehouses across Malaysia
Strong supply chain
Stronger partnerships.
We work together to deliver results that build success. One accountable partner between you and Malaysia’s tropical timber supply base.
Reliable Supply
Consistent stock and availability across a vetted producer network — not a single mill’s output.
Quality Assured
Carefully selected, precisely delivered. Moisture, dimension and grade checked before delivery.
On-Time, Every Time
Your production timeline is our priority. Delivery planned backwards from your own schedule.
Supporting Your Success
We grow when you grow. Advisory, sampling and cost engineering come as part of the partnership.
Species we regularly supply: Merbau, Balau, Chengal, Kempas, Kekatong, Meranti, Nyatoh, Kembang Semangkuk, Keranji, Perah, Rengas and Merpauh.
What we supply
Three verticals, one supplier.
Door components, furniture components and mouldings — all run to your drawing, in the density group, species and grade your application needs.
Vertical 01
Door Components
Our largest programme, and the reason most customers come to us. Light, medium and heavy hardwood — the density group is chosen for where the part sits in the door, from a laminate door core to a fire door frame.
Door Frame
Frame and jamb sections in single or double rebate, or machined to your own drawing.
- Density group
- Medium & heavy
- Form
- FJ, FJ lamination, solid
- Profile
- Single / double rebate
Lipping & Beading
The strip of wood applied to the edges of a door, plus matching glazing bead, in your cutting lengths.
- Density group
- Light & heavy
- Form
- FJ & solid
- Grade
- A
Vertical 02
Furniture Components
Panel and dressed stock for furniture, cabinet and joinery manufacturers — dimensionally stable, sanded and ready to machine.
FJ / FJLB Board
Finger-jointed lamination board for table tops, worktops, panels and concealed core.
- Density group
- Light & medium
- Form
- FJ, FJ lamination, solid
- Grade
- AA, AB, BC
S4S — Dressed Timber
Surfaced four sides and cut to your section list — ready to feed straight into your machining.
- Density group
- Light & medium
- Form
- Dressed four sides
- Grade
- Malaysian Grading Rule
Vertical 03
Mouldings
Profile work in named species — for specifiers, flooring and decking contractors, interior fit-out, staircase makers and building material distributors.
Flooring
Solid tongue-and-groove flooring in Malaysia’s hardest-wearing species.
- Species
- Merbau, Balau, Kempas, KSK
- Thickness
- 15 / 18 / 19 mm
- Width
- 70 / 90 / 120 mm
Decking
Exterior decking in dense, naturally durable species built for the tropics.
- Species
- Chengal, Balau, Kekatong, Merbau
- Thickness
- 19 / 22 mm
- Width
- 70 / 90 / 120 mm
Architrave
Door and window casing profiles, matched to your frame sets for a complete package.
- Species
- Meranti, KSK, Nyatoh
- Form
- FJ and solid
- Profile
- To your drawing
Paneling
Wall and ceiling paneling profiles for interior fit-out and feature walls.
- Species
- Balau, Meranti, KSK, Nyatoh
- Form
- FJ and solid
- Profile
- To your drawing
Step Board
Staircase treads and step boards, laminated or solid, machined to your staircase drawing.
- Species
- Meranti, Nyatoh, Merbau, KSK, Balau, Kempas
- Form
- FJ, FJL, edge lamination, solid
- Profile
- To your drawing
Need something outside this list? We regularly source other timber products from the Malaysian market on request — useful if you are consolidating a full shipment from one supplier. Tell us what you are after and we will tell you honestly whether we can do it well.
Have a drawing? Send it over.
A profile drawing, a photo of the part, or even a physical sample is enough to start. We will come back with a buildable specification, samples and a costed proposal — usually with two or three options.
Material selection
Specified by performance, not by name.
Every part starts with a density group. We hold that specification constant and source the species that meets it and is running at the time.
| Density group | Kiln-dry density | Typical applications |
|---|---|---|
| Light Hardwood | Below 600 kg/m³ | FJ / FJLB board, paneling, laminate door core, lipping, S4S furniture partsLight Meranti, KSK, Merpauh and similar |
| Medium Hardwood | 600–750 kg/m³ | Door frames, architrave, mouldings, S4S, FJ / FJLB boardThe general-purpose band — stability with a clean finish |
| Heavy Hardwood | Above 750 kg/m³ | Door stiles and rails, door frames, decking, fire doorBalau, Keranji, Perah, Rengas, Chengal and similar |
Scroll the table sideways to see all columns.
- Grade — every order
- A, B or Core, depending on the component. Core grade is used for concealed parts where appearance is not critical, which takes cost out without affecting performance.
- Moisture — every order
- Kiln-dried to the moisture level your application requires, not to a single blanket figure.
- Treatment — every order
- Chemically treated, with documentation provided where your destination market requires it.
On species: our range is deliberately broad and moves with the market. Rather than publish a fixed species list we cannot always honour, we match your application to the group and grade that performs — then quote the best-value species running at that time.
How we work
An outsourced procurement arm, not a middleman.
Expertise without the overhead. You brief the part; we handle sourcing, oversight, inspection and delivery — and stay accountable for all of it.
Enquiry & specification
Send a drawing, a sample or just the application. We translate it into a buildable spec: section, density group, grade, moisture, jointing and tolerance.
Sourcing & sampling
We match the spec against mills currently running that species and section, then send samples and a costed proposal — usually with two or three options.
Production oversight
Orders are placed and monitored on the floor. We hold the mill to your profile and schedule so problems surface early — not when the lorry reaches your factory, or the container reaches your port.
Quality assurance
Moisture, dimension, grade, joint integrity and treatment checked against our QAQC checklist before packing. Nothing leaves that we would not accept ourselves.
Delivery
Packed, marked and delivered to your terms — by road to your factory in Malaysia, or by container with full export documentation, consolidated where it saves you freight.
Checked before delivery
Quality assurance
Carefully selected. Precisely delivered.
We enforce a documented QAQC procedure on our suppliers — the discipline of an ISO-certified production floor, applied by people who have run one.
-
One aligned QAQC procedureThe mill and our team work to the same written checklist, signed off at each stage. Nothing moves on a verbal assurance.
-
Moisture & treatmentKiln-dried to the level your application needs and chemically treated, then meter-tested across the lot — not just the top layer of the bundle.
-
Dimension & gradeThickness, width and length verified by caliper and tape against the approved profile; grade confirmed against the agreed grading rule.
-
Joint & lamination integrityFinger-joint fit, glue line and bond inspected — the failure point that matters most in FJ and laminated material.
-
Defined acceptance criteriaOne face clear, accepting light scattered pinholes and light stain. No delamination, no large cracks, no rot. Written down, not assumed.
-
Packing & markingBundled, strapped and marked to your labelling standard so goods arrive ready to go straight into production.
Rooted in timber
About CEDA
Rooted in timber. Built on trust.
CEDA Ventures is a Malaysia-based timber supply partner connecting tropical timber producers with door, furniture and construction material manufacturers across the region.
The company was formed in 2024, but the experience behind it is not new. Our directors have spent over twenty years in tropical timber — including years running a family-owned sawmilling and timber component operation. We have stood on the production floor and answered for the output, not only traded from a desk. That is why our quality process reads like a producer’s rather than a broker’s.
We represent quality Malaysian timber suppliers to the manufacturing market — giving manufacturers a single, reliable access point to a wide range of tropical timber species and components, without the complexity of managing multiple suppliers themselves.
Beyond supply we provide timber advisory, quality assurance and procurement support — effectively functioning as an outsourced timber procurement arm for manufacturers who want the expertise without the overhead.
We source responsibly and work transparently.
Proud member of the MWMJC The Malaysian Wood Moulding & Joinery Council — the national trade body for Malaysia’s moulding and joinery industry since 1981.
Common questions
Answers before you ask.
The questions manufacturers and buyers put to us most often. If yours is not here, ask it directly — we will answer straight.
What does CEDA Ventures supply?
Tropical hardwood components across three verticals. Door components: core component (stile and rail), door frame, and lipping and beading. Furniture components: FJ/FJLB board and S4S dressed timber. Mouldings: flooring, decking, architrave, paneling and step board. All material is kiln-dried and chemically treated to the requirements of the application.
Do you supply outside Malaysia?
Yes. We deliver by road to manufacturers within Malaysia and by container to export buyers overseas, handling export documentation. Where it saves you freight we consolidate several product lines into a single shipment. Our head office is in Kuala Lumpur.
What is finger-jointed laminated board (FJLB)?
Finger-jointed laminated board is a solid timber panel made by joining short timber lengths end to end with interlocking finger joints, then edge-gluing those lengths into a wider board.
It uses shorter offcuts efficiently, is more dimensionally stable than a single wide board, and is widely used for door components, table tops, staircase step boards and furniture panels.
Which timber species do you supply?
For mouldings the species are established: Merbau, Balau, Kempas and Kembang Semangkuk (KSK) for flooring; Chengal, Balau, Kekatong and Merbau for decking; Meranti, KSK and Nyatoh for architrave and paneling.
For door and furniture components we specify by density group rather than a fixed species list, because tropical availability moves with the market. Light hardwood is below 600 kg/m³, medium hardwood 600–750 kg/m³, and heavy hardwood above 750 kg/m³ on a kiln-dry basis. Tell us the part and we will tell you what is running now.
Is the timber kiln-dried and treated?
Yes. All material is kiln-dried to the moisture level the application requires — an interior furniture panel and an exterior decking board are not dried to the same figure — and chemically treated. Treatment documentation is provided where the destination market requires it.
Can you manufacture to our own drawings and profiles?
Yes. Mouldings, frames and components are run to your own profile drawing, section sizes and cutting lengths. Door frames are available in single rebate, double rebate, or to your drawing. Send a drawing, a physical sample, or simply describe the application — we will translate it into a buildable specification and come back with samples and a costed proposal.
What grades are available?
Grade depends on the component. Core component is supplied in Core grade; lipping and beading in Grade A; FJ/FJLB board in AA, AB or BC; and S4S dressed timber to the Malaysian Grading Rules (MGR).
Core grade is used for concealed parts where appearance is not critical, which takes cost out without affecting performance. We will usually suggest where you can drop a grade safely.
How do you control quality?
We enforce a documented QAQC procedure on our suppliers that the mill and our own team follow to the same checklist. Checks cover moisture content sampled across the lot, dimensional tolerance verified by caliper and tape, grade verification against the agreed grading rule, finger-joint and lamination bond integrity, kiln drying and chemical treatment verification, and packing and marking.
Typical acceptance criteria: one face clear allowing light scattered pinholes and light stain, with no delamination, large cracks or rot. Our directors previously ran a timber component manufacturing operation, so the procedure follows production discipline rather than trading practice.
What is a fire door core component?
A fire door core component is the internal timber framework of a fire-rated door leaf. We supply fire door cores in high density timber above 750 kg/m³ — typically Balau, Keranji, Perah or Rengas — finger-jointed for dimensional stability.
Laminate door cores use light to medium density timber below 600 kg/m³ such as light Meranti, KSK or Merpauh.
Request a quote
Tell us the part. We’ll do the rest.
Six fields is all we need to get started. The more detail you can add, the faster we can come back with a real number.
- Samples and a costed proposal, usually with two or three options.
- No obligation, and no charge for advisory or sampling.
- If we cannot do it well, we will say so rather than waste your time.
Please check the following
Contact
Let’s talk timber.
We work with manufacturers across Malaysia and with export buyers overseas. Tell us the part you need and we will come back with options.
Head Office
CEDA Ventures PLT57A, Faber Plaza,
Jalan Desa Bakti, Taman Desa,
58100 Kuala Lumpur, Malaysia. Open in Google Maps ↗